No Products in the Cart
CLOSED CELL NEOPRENE
Closed Cell Neoprene offers good resistance to acid, alkali, gasoline, and oil. An excellent choice for applications that require resistance to UV, oxidation and ozone in long-term outdoor applications. Our series of closed cell Neoprene is a 100% Neoprene rubber and is available in Soft (SCE41NEO), Medium (SCE42NEO) and Firm (SCE43NEO) density and has a temperature range of -40°F to + 150°F.
CLOSED CELL EPDM
Closed Cell EPDM offers excellent resistance to ozone and oxidation and performs well in applications where temperatures can range from -70°F to + 220°F. Our series of closed cell EPDM is 100% EPDM rubber and is available in a soft (RE41EPT) and a medium (RE42EPT) density.
CLOSED CELL NITRILE (BUNA-N)
Closed Cell Nitrile (Buna-N) is an excellent gasket material for sealing applications that require fuel, oil and UV resistance. Closed Cell Nitrile has a high resistance to vegetable oil, animal oil, and mineral oil. and performs well as a gasket or sealing material in petroleum-based applications. Our series of Closed Cell Nitrile is a 100% Nitrile rubber with a temperature range of -40°F to + 250°F and is available in a soft (C41NBR), medium (C42NBR) and a firm (C43NBR) density.
CLOSED CELL SILICONE
Closed Cell Silicone offers excellent sealing qualities, plus compression set, flame, ozone, and UV resistance. This high-end Closed Cell Silicone is widely used for demanding applications and is excellent for applications that will be exposed to extreme temperatures ranging from -103°F to + 450°F. Silicone Closed Cell sponge is available in soft, medium, firm and extra firm densities as well as available in low compression set, flame retardant, and fiberglass reinforced grades.
CLOSED CELL ECH (EPICHLOROHYDRIN)
ECH offers excellent fuel and chemical resistance and performs well in applications where temperature can range from -40°F to 300°F. ECH is supplied in a soft density (AG-5162), medium soft density (AG-5163), medium density (AG-5164) and extra firm density (AG-5166).
CLOSED CELL EVA (ETHYLENE VINYL ACETATE)
Closed Cell EVA is light weight and odorless. This foam exhibits good mechanical strength, excellent chemical resistance, high buoyancy, low water absorption, and good acoustic properties. Closed Cell EVA foam can be supplied in 2# (AG-2011) and 4# (AG-4911) densities and demonstrates excellent climate, temperature, and aging resistance in outdoor applications.
CLOSED CELL NEOPRENE/EPDM
Closed Cell Neoprene / EPDM sponge is an excellent general purpose gasketing material that can be used in both indoor and outdoor sealing applications which may see temperatures as low as -40° F and as high as + 250° F.
Our Closed Cell Neoprene / EPDM sponge is both UL-94- HF-1 and FMVSS-302 listed and works well in gasketing applications that will be exposed to oils, ozone, sunlight and oxidation. This material is supplied in a soft density (AGSCE41M), medium-soft density (AGSCE42M), medium density (AGSCE43M), firm density (AGSCE44M) and an extra firm density (AGSCE45M).
CLOSED CELL NEOPRENE/EPDM/SBR
Closed Cell Neoprene/EPDM/SBR combines the best qualities of these three polymers which creates an excellent gasket material used in many diverse indoor and outdoor applications. Neoprene/EPDM/SBR Closed Cell sponge is resistant to ozone, sunlight, and oxidation.
This material meets UL157, UL50E, UL50, UL48, UL508 AND UL94HF-1 and are available in a soft (SCE41B), medium soft (SCE42B), medium (SCE43B) and extra firm (SCE45B) density. Neoprene/EPDM/SBR Closed Cell sponge performs well in applications that range in temperature from -40°F to + 200°F.
CLOSED CELL PVC/NITRILE
Closed Cell PVC / Nitrile sponge combines excellent energy / impact / shock absorbing properties and good chemical resistance. Closed cell PVC / Nitrile sponge is available in five grades MLC (4 pcf), MLC-2 (4 pcf), AHC (7pcf), SCC (12 pcf) and SSC (12 pcf).
Depending on the grade, our PVC / Nitrile closed cell sponge meets ASTM D 1056-68, 1056-85, 91, 98, 07, ASTM-D-6576-07 Type 2 Grade A & B Condition soft, UL 94 HF-1, UL 94 HBF, UL 94 V0, and FMVSS-302. Closed Cell PVC / Nitrile sponge is designed for applications where temperatures can range between -40°F to + 200°F.
CLOSED CELL NEOPRENE/PVC/NITRILE
Closed Cell Neoprene / PVC / Nitrile sponge is an economical sealing and gasket material for applications requiring good resistance to chemicals and conformance with UL 94 flammability ratings. Closed cell Neoprene / PVC / Nitrile sponge meets ASTM-D-1056-68, ASTM-D-1056-85, 91, 98, 07 2C1, 2B2 and 2B3, ASTM-D-6576-07 TYPE 2, Grade A & B condition soft and medium and is an excellent gasketing material for automotive applications and electrical enclosures that require a UL 94 HF-1, UL 94 V0 or UL 94 HBF flammability rating.
Neoprene / PVC / Nitrile Closed Cell sponge is available in three densities: IV1 (4 pcf), IV2 (6 pcf) and IV3 (8 pcf) and works well in temperatures ranging from -40°F to + 200°F.
